Products
  • BCN-H150 Series Built in LED Power Supply
  • BCN-H150 Series Built in LED Power Supply
BCN-H150 Series Built in LED Power Supply
  • Universal 220VAC input 
  • High efficiency, long life, and high reliability
  • Built in EMI filter, low ripple noise.
  • Protections: Short circuit / Over current, over temperature is optional.
  • Cooling by free air convection
  • Low cost
  • 3 years warranty

MODEL

BCN-H150V012T

NOTE

OUTPUT

DC Voltage

12Vdc

 

Rated Current

12.5 A

 

Rated Power

150 W

Note 1  

Efficiency

≧85%(Typ. 85.5%) 

Note 2  

Line Regulation

±1%

 

Load Regulation

±2%

 

Voltage Tolerance

±2%

 

Ripple & Noise (Max.)

≤400 mVp-p

Note 3  

Dynamic Response Overshoot

≤5%

Note 4  

Dynamic response recovery time

200 us

Turn-on Delay Time

≤2 s

 

Shutdown Hold Time

/

 

Switching Overshoot Amplitude

≤±10%

 

INPUT

Rated Voltage Range

220Vac 

 

Voltage Range

190~250Vac 

Note 1

Frequency Range

47-63Hz (typical 50/60Hz)

 

Max Ac Current

2 A

Note 5  

Inrush Current(Typ.)

≤60A

Note 6  

PROTECTION

Current Limiting

15-17 A

Note 7  

Short Circuit

Long term short circuit without damage

Note 8  

ENVIRONMENT

Working Temp.

-30~ +50℃(Typ. 25℃)

Note 9  

Storage Temp., Humidity

-35 ~ +85C, 5 ~ 90% RH

 

Altitude

0-2000 m

Note 10  

Cooling Method

Self-cooling

 

SAFETY

Safety Standards

GB4943/UL1012

Withstand Voltage

I/P-O/P: 3000VAC   I/P-FG: 1800VAC   O/P-FG: 500VAC

Isolation Resistance

I/P-O/P, I/P- FG,O/P- FG: 50 MΩ/ 500VDC / 25℃/ 70% RH

EMS

/

EMC

/

OTHERS

MTBF

F≥100Khour, 25℃,full load output,MIL-HDBK-217F Notice2

Dimension

199*48*30 mm (L*W*H)

Packing

/

Installation requirements: When installing, the power supply bottom shell should be in close contact with the case to ensure heat dissipation of the power supply. When used in dusty environments, dust prevention measures should be taken to avoid operational failures.

 

◼     NOTE

1.      Refer to derating curve.

2.      220Vac input, rated load, 25℃.

3.      Maximum input full load, bandwidth limit of 20MHz, output with 10uf+0.1uf capacitance.

4.      25%~50%~25 and 50%~75%~50% load dynamic, the half-wave period is 4mS, the current change slope is 0.1A/us.

5.      220Vac input, full load.

6.      220Vac input, 25 ℃, cold start.

7.      Hiccup model recovers automatically after fault condition is removed.

8.      Turn off the output voltage and recover after normal restart.

9.      Refer to the derating curve, can power on at -35 ℃.

10.    Above 2000m, 1.5% load reduction for every 100 meters increase.

 

Inquiry

+8675523208269

jack_xu@leadpowers.com

https://www.leadpowers.com

+8675523208269

Unit 401-403,Block 5B,Skyworth Innovation Valley,Tangtou 1st Road ,Shiyan Street,Bao'an District, Shenzhen,China

CONTACT US
  • Name*

  • E-Mail*

  • Write Your Message*

  • Code*

  • SEND
Copyright ® Shenzhen LeadPower Technology Co., Ltd. All Rights Reserved