Products
  • WBP-H240 Series Waterproof LED Power Supply
  • WBP-H240 Series Waterproof LED Power Supply
  • WBP-H240 Series Waterproof LED Power Supply
  • WBP-H240 Series Waterproof LED Power Supply
  • WBP-H240 Series Waterproof LED Power Supply
  • WBP-H240 Series Waterproof LED Power Supply
  • WBP-H240 Series Waterproof LED Power Supply
  • WBP-H240 Series Waterproof LED Power Supply
  • WBP-H240 Series Waterproof LED Power Supply
  • WBP-H240 Series Waterproof LED Power Supply
WBP-H240 Series Waterproof LED Power Supply
  • High efficiency, long life and high reliability
  • Voltage input range 176~264VAC
  • -40~+70°C operating temperature (reference derating curve)
  • All use 105°C long-life electrolytic capacitors
  • Output short-circuit/overload/overvoltage/overtemperature protection function
  • Natural heat dissipation
  • 100% full load aging
  • 5-year warranty
Model WBP-H240-V012 WBP-H240-V024 WBP-H240-V036 WBP-H240-V048
Input Voltage range 176~264VAC   (please refer to the derating curve)
Input current 1.2A/230VAC,
Frequency Range  47~63Hz
TYP(@230Vac) 90% 92% 92% 92.5%
PFC  PF≥0.95/230VAC
leakage current  <0.7mA/240VAC
Inrush current Low temperature start-up60A /230VAC
Output DC voltage 12V 24V 36V 48V
Rated current 20A 10A 6.6A 5A
Output power 240W 240W 237.6W 240W
Voltage Adj. Range        
Ripple & noise 300mVp-p 300mVp-p 360mVp-p 500mVp-p
Rise up time  1000ms,50ms/230VDC  Load100%
Switch on deday time 50ms/230VAC,Load100%
Line regulation ±0.5% ±0.5% ±0.5% ±0.5%
Load regulation ±3% ±2% ±1.5% ±1.5%
Voltage tolerance ±3.0% ±2.0% ±1.5% ±1.0%
Environment condictions Range of working temperature -40~70°C 20%~95%RH non-condensing (refer to derating curve for details)
Storage temperature -40~80℃ 10%~95%RH Non-condensing
Vibration Frequency range 10 ~ 500Hz, acceleration 2G, each sweep cycle of 10min, along the X, Y, Z axis for 6 sweep cycles
Impact Acceleration 20G, duration 11ms, 3 shocks each along the X, Y, Z axes
Altitude 5000mtrs (more than 2000m, for every 100m increase, the ambient temperature is reduced by 0.6 °C)
EMC EMC emission Design Reference:EN55015; EN61000-3-3; GB17743, GB17625.1
Harmonic current EN61000-3-2 Class C (@load≧60%)
EMC immunity Design Reference:EN61000-4-2,3,4,5,6,8,11; EN61547; Surge Immunity: Line-to-Wire 4kV, Line-to-Ground 6kV Criterion B
Safety regulations Safety specifications Design Reference:GB19510.1,GB19510.14;IEC/EN61347-1、EN61347-2-13;
Electrical
Strength
Input--Output I/P-O/P: 3.75Vac; Input --- Enclosure I/P-CASE: 2kVac; Output --- Enclosure O/P-CASE: 0.5kVac Each test time is: 1min
Insulation resistance I/P-O/P:≥50M ohms;I/P-Case:≥50M ohms;O/P-Case:≥50M ohms


Protection


Over Voltage protection 14~16V 26~28V 39~50V 51~63V
Shutdown output, self-recovering

Over load protection 110~165% off output, hiccup mode
Over temperature protection  Turns off the output and recovers when the temperature drops
Short circuit protection  The power supply shuts down after the output is shorted, and the short circuit is removed and self-recovering
Reliability MTBF 25°C environmen:150000Hrs,MIL-217 Method
Others Dimension 230*63*40mm(L*W*H)
Packaging 1.07Kg/Piece,12Piece/Box,13.5KG/box
Cooling method  √Ventilation cooling  Air cooling
Extension method  Three-proofing lacquer Stamped  √Low temperature start-up(-40℃)  Others
Note *Unless otherwise specified, all specifications are measured at an input of 230VAC, rated load, 25°C.
*In order to extend the service life, it is recommended to leave an additional 30% margin when configuring the load. For example, if the device requires 100W of power, the power supply of not less than 130W is selected.
* Switching power supply ripple test method: test on the power supply output terminal with a 20MHz oscilloscope, the ground length of the oscilloscope probe is not more than 12mm, and the probe input is paralleled with 47uF electrolytic capacitors and 0.1uF high frequency capacitors.
*The power supply is part of the equipment system components, and all EMC tests need to be confirmed in conjunction with the end equipment for electromagnetic compatibility.
Inquiry

+8675523208269

jack_xu@leadpowers.com

https://www.leadpowers.com

+8675523208269

Unit 401-403,Block 5B,Skyworth Innovation Valley,Tangtou 1st Road ,Shiyan Street,Bao'an District, Shenzhen,China

CONTACT US
  • Name*

  • E-Mail*

  • Write Your Message*

  • Code*

  • SEND
Copyright ® Shenzhen LeadPower Technology Co., Ltd. All Rights Reserved