Products
  • WBP-H120 Waterproof LED Power Supply
  • WBP-H120 Waterproof LED Power Supply
  • WBP-H120 Waterproof LED Power Supply
  • WBP-H120 Waterproof LED Power Supply
  • WBP-H120 Waterproof LED Power Supply
  • WBP-H120 Waterproof LED Power Supply
WBP-H120 Waterproof LED Power Supply
  • Rated input voltage range 200-240Vac
  • Constant voltage + constant current output mode
  • Built-in active PFC function, PF>0.95
  • High efficiency, low temperature rise, high reliability
  • Built-in EMI filter, lower ripple & noise6. Protections: output over voltage, over load, short circuit, & over temperature
  • CCC & CE approvals
    5-year warranty
Model WBP-H120-012T
Input Rated Input Voltage 200-240Vac
Input Voltage Range 180~264Vac
Frequency Range 47~63(Typ. 50/60)HZ
Max. Input Current ≤1.5A
Inrush Current ≤90A
PF ≥0.95
THD ≤15%
Output Rated output voltage 12V
Voltage Range Under Constant Current Area 12~24Vdc
Rated Output Current 9A
Max. Output Power 120W
Efficiency ≥87%(Typ. 88.5%)
Output Ripple & Noise ≤200mVp-p
Dynamic Response Overshoot ≤5%
Dynamic Response Recovery Time 200μs
Line regulation ±1%
Load regulation ±2%
Voltage tolerance ≤±2%
Turn-On/Off Overshoot ≤±10%
 Turn-On Delay Time ≤3s
Power on/Power off Overshoot ≤±10%
Voltage Rise Time ≤200ms
Environment Condition Range of working temperature -40~ +70(Typ. 25)℃
Storage temperature -40~+85(Typ. 25)℃
Relative Humidity 10~95%
Cooling Method Ventilation Cooling
Altitude 0~5000m
Protection Rating IP67
 Max. Case Temperature 90℃
Safety  Leakage Current ≤0.7mA 240Vac/60Hz
Dielectrical Strength Input To Output 3750Vac 60S,current≤10mA No arc,
no breakdown
Input To FG 1750Vac 60S,current≤10mA
Output To FG 500Vac 60S,current≤10mA
Insulation resistance Input To Output ≥10MΩ@ 500Vdc 1atm, 90%RH, 500VDC
Input To FG ≥10MΩ@ 500Vdc
Output To FG ≥10MΩ@ 500Vdc
Safety Standard  Standard IEC/EN61347-1,EN61347-2-13,GB19510, & UL1310
EMC Harmonic Current  IEC 61000-3-2 Class C (@Load≥50%)
Conducted Emissions (CE) EN55015
Radiated Emissions (RE) EN55015
Radiated, Radio-Frequency, Electromagnetic Field Immunity (RS) IEC 61000-4-3 Level 2, IEC61547, Criterion B
Conducted Immunity (CS) IEC 61000-4-6 Level 2, IEC61547, Criterion B
Electrical Fast Transient (EFT)/Burst IEC 61000-4-4 Level 2, IEC61547, Criterion B
Surge IEC 61000-4-5 Differential Mode: ±2kV
Common Mode: ±4kV Criterion B
Protection Over voltge protection ≤16V
Over-temperature protection 60-80℃ Ambient Temperature, full load 
Output short-circuit protection Long time short-circuit protection without damage, recovers automatically after fault condition is removed.
Reliability MTBF 25℃:100000Hrs,MIL-217 Method
Others Dimension 185*50*31(L*W*H)
Cooling method √Ventilation Cooling  ◻️air cooling
Extension method ◻️Three-proofing lacquer  ◻️Stamped 
◻️Low temperature start-up(-40℃)◻️Others
Note *Unless otherwise specified, all specifications are measured at an input of 230VAC, rated load, 25°C.
*In order to extend the service life, it is recommended to leave an additional 30% margin when configuring the load. For example, if the device requires 100W of power, the power supply of not less than 130W is selected.
* Switching power supply ripple test method: test on the power supply output terminal with a 20MHz oscilloscope, the ground length of the oscilloscope probe is not more than 12mm, and the probe input is paralleled with 47uF electrolytic capacitors and 0.1uF high frequency capacitors.
*The power supply is part of the equipment system components, and all EMC tests need to be confirmed in conjunction with the end equipment for electromagnetic compatibility.
Inquiry

+8675523208269

jack_xu@leadpowers.com

https://www.leadpowers.com

+8675523208269

Unit 401-403,Block 5B,Skyworth Innovation Valley,Tangtou 1st Road ,Shiyan Street,Bao'an District, Shenzhen,China

CONTACT US
  • Name*

  • E-Mail*

  • Write Your Message*

  • Code*

  • SEND
Copyright ® Shenzhen LeadPower Technology Co., Ltd. All Rights Reserved