Products
  • RAN-H600 Series Rainproof LED Power Supply
  • RAN-H600 Series Rainproof LED Power Supply
  • RAN-H600 Series Rainproof LED Power Supply
  • RAN-H600 Series Rainproof LED Power Supply
  • RAN-H600 Series Rainproof LED Power Supply
  • RAN-H600 Series Rainproof LED Power Supply
  • RAN-H600 Series Rainproof LED Power Supply
  • RAN-H600 Series Rainproof LED Power Supply
  • RAN-H600 Series Rainproof LED Power Supply
  • RAN-H600 Series Rainproof LED Power Supply
  • RAN-H600 Series Rainproof LED Power Supply
  • RAN-H600 Series Rainproof LED Power Supply
RAN-H600 Series Rainproof LED Power Supply
  • Rated input voltage range 220~240Vac 
  • High efficiency, low temperature rise, high quality;
  • With output over current protection, short circuit protection, over voltage protection & over temperature protection.
  • 3-years warranty 

 

Model RAN-H600-V012
Input Rated Input Voltage 220-240/ 100-120VAC
Input Voltage Range 190~264/ 90~130Vac
Frequency Range 47~63(Typ. 50/60)HZ
Max. Input Current ≤8A
Inrush Current ≤110A
Output Rated output voltage 12V
Rated Output Current 50A
Max. Output Power 600W
Efficiency ≥87%(Typ. 88%)
Output Ripple & Noise ≤300mVp-p
Dynamic Response Overshoot ≤5%
Dynamic Response Recovery Time 200μs
Line regulation ±1%
Load regulation ±2%
Voltage tolerance ±2%
Environment Condition Range of working temperature -20~+50(Typ.25)
Storage temperature -40~+80(Typ. 25)
Relative Humidity 5~90%
Cooling Method Forced-Air Cooling Built-in fan (do not block the air duct of the fan when using, so as not to affect normal use)
Atmospheric Pressure 70~106Kpa
Altitude 0~3000m
Safety &EMC Leakage Current Input To FG ≤3.5mA 240Vac/60Hz
Input To Output ≤0.25mA
Dielectrical Strength Input To Output 1500Vac/10mA/1min No arc,
no breakdown
Input To FG 1500Vac/10mA/1min
Output To FG 500Vac/10mA/1min
Insulation resistance Input To Output ≥10MΩ@ 500Vdc 1atm, 90%RH, 500VDC
Input To FG ≥10MΩ@ 500Vdc
Output To FG ≥10MΩ@ 500Vdc
Safety Standards UL60950,IEC/EN60950, GB4943.1-2011
EMS Surge:IEC61000-4-5 Line to Line:±2kV, Line to FG:±4kV
Protection Over voltge protection ≤16V Hiccup mode, recovers automatically after fault condition is removed.
Overload protection 65~80A, Hiccup mode, recovers automatically after fault condition is removed.
Over-temperature protection /Optional Ambient Temperature, Rated load 
Output short-circuit protection Recovers automatically after fault condition is removed.
Reliability MTBF 25℃:100000Hrs,MIL-217 Method
Others Cooling method ⬜Ventilation Cooling  √air cooling
Dimensions 292*151*90mm (L*W*H)
Extension method ⬜Three-proofing lacquer  ⬜Stamped 
⬜Low temperature start-up(-40℃)⬜Others
Note *Unless otherwise specified, all specifications are measured at an input of 230VAC, rated load, 25°C.
*In order to extend the service life, it is recommended to leave an additional 30% margin when configuring the load. For example, if the device requires 100W of power, the power supply of not less than 130W is selected.
* Switching power supply ripple test method: test on the power supply output terminal with a 20MHz oscilloscope, the ground length of the oscilloscope probe is not more than 12mm, and the probe input is paralleled with 47uF electrolytic capacitors and 0.1uF high frequency capacitors.
*The power supply is part of the equipment system components, and all EMC tests need to be confirmed in conjunction with the end equipment for electromagnetic compatibility.
Inquiry

+8675523208269

jack_xu@leadpowers.com

https://www.leadpowers.com

+8675523208269

Unit 401-403,Block 5B,Skyworth Innovation Valley,Tangtou 1st Road ,Shiyan Street,Bao'an District, Shenzhen,China

CONTACT US
  • Name*

  • E-Mail*

  • Write Your Message*

  • Code*

  • SEND
Copyright ® Shenzhen LeadPower Technology Co., Ltd. All Rights Reserved