Products
  • BBN-H150 Series Built in LED Power Supply
  • BBN-H150 Series Built in LED Power Supply
  • BBN-H150 Series Built in LED Power Supply
  • BBN-H150 Series Built in LED Power Supply
  • BBN-H150 Series Built in LED Power Supply
  • BBN-H150 Series Built in LED Power Supply
  • BBN-H150 Series Built in LED Power Supply
  • BBN-H150 Series Built in LED Power Supply
  • BBN-H150 Series Built in LED Power Supply
  • BBN-H150 Series Built in LED Power Supply
  • BBN-H150 Series Built in LED Power Supply
  • BBN-H150 Series Built in LED Power Supply
BBN-H150 Series Built in LED Power Supply
  • High efficiency, long life and high reliability

  • Voltage input range 176~264VAC

  • -30~+70℃ working temperature (check the derating curve for details)

  • All use 105°C long-life electrolytic capacitors

  • Short circuit/overload protection function

  • Natural heat dissipation

  • 100% full load aging

  • 3 years warranty

Model BBN-H150-V012 BBN-H150-V024 BBN-H150-V036 BBN-H150-V048
Input Voltage range 176~264VAC
Input Current 230VAC/1.7A
Efficiency ≥86% ≥87% ≥88% ≥88%
Frequency Range 47~63HZ
Leakage Current <1mA/240VAC
Inrush Current 60A/230VAC,Cold start
Output Rated output voltage 12V 24V 36V 48V
Rated current 12.5A 6.3A 4.17A 3.15A
Voltage power 150W 151.2W 150.12W 151.2W
Voltage Adj. Range ±5% ±5% ±3% ±3%
Output Ripple & Noise 200mVp-p 250mVp-p 300mVp-p 300mVp-p
Rise up time 2000ms,50ms/230VAC, fully loaded 100%
Swich on delay time 20ms/230VAC, fully loaded100%
Line regulation ±0.5% ±0.5% ±0.5% ±0.5%
Load regulation ±0.5% ±0.5% ±1.0% ±1.0%
Voltage
tolerance
±1.0% ±1.0% ±1.0% ±1.0%
Environment Condition Range of working temperature -30~70℃ 20%~95%RH, no condensation(Refer to derating curving)
Storage temperature -30~80℃ 20%~95%RH, no condensation -40~80℃ 10%~95%RH, no condensation
Vibration Frequency range 10 ~ 500Hz, acceleration 2G, each sweep cycle of 10min, along the X, Y, Z axis for 6 sweep cycles
Impact Acceleration 20G, duration 11ms, 3 shocks each along the X, Y, Z axes
Altitude 2000mtrs(Above 2000m, the ambient temperature decreases by 0.6℃ for every 100m rise)
EMC Electromagnetic resistance Design Reference:EN55024;EN61000-4-2,3,4,5,6,8,11
Harmonic current Design Reference:GB17625.1;EN61000-3-2,-3 limit requirements
EMC specification Design Reference:EN55022
Safety regulations Safety Specifications Design Reference:GB4943/UL1012
Dielectrical Strength  I/P-O/P:3.0Kvac/10mA/1min;
I/P-FG:1.5Kvac/10mA/1min;
O/P-FG:0.5Kvac/10mA/1min 
Input-- I/P-O/P:1.5Kvac/5mA/1min;
I/P-CASE:1.5Kvac/5mA/1min;
O/P-CASE:0.5Kvac/5mA/1min 
Insulation resistance I/P-O/P:10M ohms@500Vdc;
I/P-FG:10M ohms@500Vdc;
O/P-FG:10M ohms@500Vdc
I/P-O/P:50M ohms;
I/P-Case:50M ohms;
O/P-Case:50M ohms
Protection Over voltge protection 13.5-16.5 27-30 39-42 52-55
Shut down output voltage, re-power on to recover.
Overload protection 110~165% rated, Hiccup mode, after eliminating overload can automatically return to normal work
Over-temperature protection /
Output short-circuit protection Recovers automatically after fault condition is removed.
Reliability MTBF 25℃:100000Hrs,MIL-217 Method
Others Dimension 159*97*30(L*W*H)
Packaging 0.38Kg/piece,40 pieces/box,17KG/box
Cooling method √Ventilation Cooling  ◻️air cooling
Extension method ◻️Three-proofing lacquer  ◻️Stamped
◻️Low temperature start-up(-40℃)◻️Others
Note *Unless otherwise specified, all specifications are measured at an input of 230VAC, rated load, 25°C.
*In order to extend the service life, it is recommended to leave an additional 30% margin when configuring the load. For example, if the device requires 100W of power, the power supply of not less than 130W is selected.
* Switching power supply ripple test method: test on the power supply output terminal with a 20MHz oscilloscope, the ground length of the oscilloscope probe is not more than 12mm, and the probe input is paralleled with 47uF electrolytic capacitors and 0.1uF high frequency capacitors.
*The power supply is part of the equipment system components, and all EMC tests need to be confirmed in conjunction with the end equipment for electromagnetic compatibility.
Inquiry

+8675523208269

jack_xu@leadpowers.com

https://www.leadpowers.com

+8675523208269

Unit 401-403,Block 5B,Skyworth Innovation Valley,Tangtou 1st Road ,Shiyan Street,Bao'an District, Shenzhen,China

CONTACT US
  • Name*

  • E-Mail*

  • Write Your Message*

  • Code*

  • SEND
Copyright ® Shenzhen LeadPower Technology Co., Ltd. All Rights Reserved